Loading ...
Loading ...
Loading ...
2 CHECK IGNITION TIMING
With CONSULT-II
1. Run engine at about 2,000 rpm for about 2 minutes under no-load.
2. Rev engine two or three times under no-load, then run engine at idle speed for about 1 minute.
SEF978U
3. Select “IGNITION TIMING ADJ” in WORK SUPPORT mode.
4. Touch “START”.
PEF546N
5. Rev engine (2,000 to 3,000 rpm) two or three times under no-load, then run engine at idle speed.
6. Check ignition timing with a timing light.
SEF320V
MT: 20°±2° BTDC
OK or NG
OK 䊳 GO TO 5.
NG 䊳 GO TO 4.
BASIC SERVICE PROCEDURE
KA24DE
Idle Speed/Ignition Timing/Idle Mixture Ratio Adjustment (Cont’d)
EC-56
Loading ...
Loading ...
Loading ...