Loading ...
Loading ...
Loading ...
DTC Work Support Mode
NGEC0555S0802
Test mode Test item Condition Reference page
EVAPORATIVE SYSTEM
EVAP SML LEAK P0440
Refer to corresponding
trouble diagnosis for
DTC.
EC-958
EVAP VERY SML LEAK P1441 EC-1077
PURG VOL CN/V P1444 EC-1092
PURGE FLOW P1447 EC-1111
VC CUT/V BP/V P1491 EC-1141
HEATED OXYGEN SEN-
SOR 1 (FRONT)
HO2S1 (B1) P0130 EC-778
HO2S1 (B1) P0131 EC-789
HO2S1 (B1) P0132 EC-798
HO2S1 (B1) P0133 EC-807
HO2S1 (B2) P0150 EC-778
HO2S1 (B2) P0151 EC-789
HO2S1 (B2) P0152 EC-798
HO2S1 (B2) P0153 EC-807
HEATED OXYGEN SEN-
SOR 2 (REAR)
HO2S2 (B1) P0137 EC-836
HO2S2 (B1) P0138 EC-846
HO2S2 (B1) P0139 EC-856
HO2S2 (B2) P0157 EC-836
HO2S2 (B2) P0158 EC-846
HO2S2 (B2) P0159 EC-856
SEF705Y
SEF707X
REAL TIME DIAGNOSIS IN DATA MONITOR MODE
(RECORDING VEHICLE DATA)
NGEC0555S09
CONSULT-II has two kinds of triggers and they can be selected by
touching “SETTING” in “DATA MONITOR” mode.
1) “AUTO TRIG” (Automatic trigger):
쐌 The malfunction will be identified on the CONSULT-II screen in
real time.
In other words, DTC/1st trip DTC and malfunction item will be
displayed if the malfunction is detected by ECM.
At the moment a malfunction is detected by ECM, “MONITOR”
in “DATA MONITOR” screen is changed to “Recording Data ...
xx%” as shown at left, and the data after the malfunction detec-
tion is recorded. Then when the percentage reached 100%,
“REAL-TIME DIAG” screen is displayed. If “STOP” is touched
on the screen during “ Recording Data ... xx%”, “REAL-TIME
DIAG” screen is also displayed.
The recording time after the malfunction detection and the
recording speed can be changed by “TRIGGER POINT” and
“Recording Speed”. Refer to CONSULT-II OPERATION
MANUAL.
2) “MANU TRIG” (Manual trigger):
쐌 DTC/1st trip DTC and malfunction item will not be displayed
ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION
VG33E
CONSULT-II (Cont’d)
EC-686
Loading ...
Loading ...
Loading ...