Loading ...
Loading ...
Loading ...
SEF058Y
DTC Confirmation Procedure
=NGEC0793
NOTE:
If “DTC Confirmation Procedure” has been previously conducted,
always turn ignition switch OFF and wait at least 5 seconds before
conducting the next test.
With CONSULT-II
1) Turn ignition switch ON.
2) Select “DATA MONITOR” mode with CONSULT-II.
3) Start engine, and rev engine more than 1,000 rpm once, then
let it idle for more than 40 seconds.
4) If DTC is detected, go to “Diagnostic Procedure”, EC-1043.
SEF755U
Overall Function Check
NGEC0794
Use this procedure to check the overall function of the A/T control
circuit. During this check, a DTC might not be confirmed.
Without CONSULT-II
1) Start engine.
2) Check voltage between
ECM terminal 26 and ground.
ECM terminal 27 and ground.
Voltage:6-8V
3) If NG, go to “Diagnostic Procedure”, EC-1043.
DTC P0600 A/T CONTROL
VG33E
DTC Confirmation Procedure
EC-1041
GI
MA
EM
LC
FE
CL
MT
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
Loading ...
Loading ...
Loading ...