Loading ...
Loading ...
Loading ...
Description
NGEC0845
SYSTEM DESCRIPTION
NGEC0845S01
Sensor Input Signal to ECM
ECM
function
Actuator
Camshaft position sensor Engine speed
EVAP can-
ister purge
flow control
EVAP canister purge volume
control solenoid valve
Mass air flow sensor Amount of intake air
Engine coolant temperature sensor Engine coolant temperature
Ignition switch Start signal
Throttle position sensor Throttle position
Throttle position switch Closed throttle position
Heated oxygen sensors 1 (front)
Density of oxygen in exhaust gas
(Mixture ratio feedback signal)
Fuel tank temperature sensor Fuel temperature in fuel tank
Vehicle speed sensor Vehicle speed
This system controls flow rate of fuel vapor from the EVAP canis-
ter. The opening of the vapor by-pass passage in the EVAP canis-
ter purge volume control solenoid valve changes to control the flow
rate. The EVAP canister purge volume control solenoid valve
repeats ON/OFF operation according to the signal sent from the
ECM. The opening of the valve varies for optimum engine control.
The optimum value stored in the ECM is determined by consider-
ing various engine conditions. When the engine is operating, the
flow rate of fuel vapor from the EVAP canister is regulated as the
air flow changes.
SEF337U
COMPONENT DESCRIPTION
NGEC0845S02
The EVAP canister purge volume control solenoid valve uses a
ON/OFF duty to control the flow rate of fuel vapor from the EVAP
canister. The EVAP canister purge volume control solenoid valve
is moved by ON/OFF pulses from the ECM. The longer the ON
pulse, the greater the amount of fuel vapor that will flow through the
valve.
CONSULT-II Reference Value in Data Monitor
Mode
NGEC0846
Specification data are reference values.
MONITOR ITEM CONDITION SPECIFICATION
PURG VOL C/V
쐌 Engine: After warming up
쐌 Air conditioner switch OFF
쐌 Shift lever: “N”
쐌 No-load
Idle (Vehicle stopped) 0%
2,000 rpm —
DTC P1444 EVAP CANISTER PURGE VOLUME CONTROL
SOLENOID VALVE
VG33E
Description
EC-1092
Loading ...
Loading ...
Loading ...