Loading ...
Loading ...
Loading ...
Component Description
NGEC1007
The absolute pressure sensor detects ambient barometric pressure
and sends the voltage signal to the ECM. As the pressure
increases, the voltage rises. The absolute pressure sensor is built
into ECM.
On Board Diagnosis Logic
NGEC1008
DTC No. Malfunction is detected when ... Check Items (Possible Cause)
P0105 An excessively low or high voltage from the sensor is
sent to the micro computer.
쐌 ECM
SEF058Y
DTC Confirmation Procedure
NGEC1009
NOTE:
If “DTC Confirmation Procedure” has been previously conducted,
always turn ignition switch “OFF” and wait at least 5 seconds
before conducting the next test.
With CONSULT-II
1) Turn ignition switch “ON”.
2) Select “DATA MONITOR” mode with CONSULT-II.
3) Wait at least 6 seconds.
4) If 1st trip DTC is detected, go to “Diagnostic Procedure”,
EC-161.
With GST
Follow the procedure “With CONSULT-II” above.
DTC P0105 ABSOLUTE PRESSURE SENSOR
KA24DE
Component Description
EC-160
Loading ...
Loading ...
Loading ...