Loading ...
Loading ...
Loading ...
Detected items Engine operating condition in fail-safe mode
Engine coolant tempera-
ture sensor circuit
Engine coolant temperature will be determined by ECM based on the time after turning ignition switch
to ON or START.
CONSULT-II displays the engine coolant temperature decided by ECM.
Condition
Engine coolant temperature decided (CONSULT-II
display)
Just as ignition switch is turned to ON or Start 40°C (104°F)
More than approx. 4 minutes after ignition ON or
Start
80°C (176°F)
Except as shown above
40-80°C (104 - 176°F)
(Depends on the time)
SEF058Y
DTC Confirmation Procedure
NGEC0075
NOTE:
If “DTC Confirmation Procedure” has been previously conducted,
always turn ignition switch OFF and wait at least 5 seconds before
conducting the next test.
With CONSULT-II
1) Turn ignition switch ON.
2) Select “DATA MONITOR” mode with CONSULT-II.
3) Wait at least 5 seconds.
4) If 1st trip DTC is detected, go to “Diagnostic Procedure”,
EC-171.
With GST
Follow the procedure “With CONSULT-II”.
DTC P0115 ENGINE COOLANT TEMPERATURE
SENSOR (ECTS) (CIRCUIT)
KA24DE
On Board Diagnosis Logic (Cont’d)
EC-169
FE
CL
MT
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
GI
MA
EM
LC
Loading ...
Loading ...
Loading ...