Loading ...
Loading ...
Loading ...
DTC Confirmation Procedure
=NGEC0223
Perform “Procedure for malfunction A” first. If DTC cannot be
confirmed, perform “Procedure for malfunction B and C”.
NOTE:
If “DTC Confirmation Procedure” has been previously conducted,
always turn ignition switch OFF and wait at least 5 seconds before
conducting the next test.
TESTING CONDITION:
Before performing the following procedure, confirm that bat-
tery voltage is more than 10.5V.
SEF058Y
PROCEDURE FOR MALFUNCTION A
NGEC0223S01
With CONSULT-II
1) Turn ignition switch ON.
2) Select “DATA MONITOR” mode with CONSULT-II.
3) Crank engine for at least 2 seconds.
4) If 1st trip DTC is detected, go to “Diagnostic Procedure”,
EC-323.
With GST
Follow the procedure “With CONSULT-II”.
SEF058Y
PROCEDURE FOR MALFUNCTION B AND C
NGEC0223S02
With CONSULT-II
1) Turn ignition switch ON.
2) Select “DATA MONITOR” mode with CONSULT-II.
3) Start engine and run it for at least 2 seconds at idle speed.
4) If 1st trip DTC is detected, go to “Diagnostic Procedure”,
EC-323.
With GST
Follow the procedure “With CONSULT-II”.
DTC P0340 CAMSHAFT POSITION SENSOR (CMPS)
KA24DE
DTC Confirmation Procedure
EC-321
FE
CL
MT
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
GI
MA
EM
LC
Loading ...
Loading ...
Loading ...