Loading ...
Loading ...
Loading ...
10 ADJUSTMENT THROTTLE POSITION SENSOR IDLE POSITION-2
With CONSULT-II
Turn throttle position sensor body counterclockwise until “CLSD THL/P SW” signal switches to “OFF”.
AEC872A
䊳 GO TO 11.
11 ADJUSTMENT THROTTLE POSITION SENSOR IDLE POSITION-3
With CONSULT-II
1. Temporarily tighten sensor body fixing bolts as follows.
쐌 Gradually move the sensor body clockwise and stop it when “CLSD THL/P SW” signal switches from “OFF” to
“ON” when tightening sensor body fixing bolts.
AEC872A
2. Make sure two or three times that the signal is “ON” when the throttle valve is closed and “OFF” when it is opened.
3. Remove 0.1 mm (0.004 in) feeler gauge then insert 0.3 mm (0.012 in) feeler gauge.
4. Make sure two or three times that the signal remains “OFF” when the throttle valve is closed.
5. Tighten throttle position sensor.
6. Check “CLSD THL/P SW” signal again.
The signal remains “OFF” while closing throttle valve.
OK or NG
OK 䊳 1. Remove 0.3 mm (0.012 in) feeler gauge.
2. GO TO 12.
NG 䊳 GO TO 9.
TROUBLE DIAGNOSIS — BASIC INSPECTION
KA24DE
Basic Inspection (Cont’d)
EC-111
FE
CL
MT
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
GI
MA
EM
LC
Loading ...
Loading ...
Loading ...