Loading ...
Loading ...
Loading ...
4 RETIGHTEN GROUND SCREWS
1. Turn ignition switch OFF.
2. Loosen and retighten engine ground screws.
SEF325V
䊳 GO TO 5.
5 CHECK POWER SUPPLY
1. Disconnect throttle position sensor harness connector.
SEF265S
2. Turn ignition switch ON.
3. Check voltage between terminal 1 and ground with CONSULT-II or tester.
SEF564P
Voltage: Approximately 5V
OK or NG
OK 䊳 GO TO 6.
NG 䊳 Repair harness or connectors.
DTC P0120 THROTTLE POSITION SENSOR
KA24DE
Diagnostic Procedure (Cont’d)
EC-180
Loading ...
Loading ...
Loading ...