Loading ...
Loading ...
Loading ...
SEF174Y
DTC Confirmation Procedure
=NGEC0198
NOTE:
If “DTC Confirmation Procedure” has been previously conducted,
always turn ignition switch OFF and wait at least 5 seconds before
conducting the next test.
With CONSULT-II
1) Turn ignition switch ON.
2) Select “DATA MONITOR” mode with CONSULT-II.
3) Wait at least 10 seconds.
If 1st trip DTC is detected, go to “Diagnostic Procedure”,
EC-297.
If the result is OK, go to following step.
NOTE:
If “COOLAN TEMP/S” is already less than 60°C (140°F) before
step 4), the result will be OK. If “COOLAN TEMP/S” is above 60°C
(140°F), go to the following step.
4) Check “COOLAN TEMP/S” signal.
If the signal is less than 60°C (140°F), the result will be OK.
If the signal is above 60°C (140°F), go to the following step.
5) Cool engine down until “COOLAN TEMP/S” signal is less than
60°C (140°F).
6) Wait at least 10 seconds.
7) If 1st trip DTC is detected, go to “Diagnostic Procedure”,
EC-297.
With GST
Follow the procedure “With CONSULT-II”.
DTC P0180 FUEL TANK TEMPERATURE SENSOR
KA24DE
DTC Confirmation Procedure
EC-295
FE
CL
MT
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
GI
MA
EM
LC
Loading ...
Loading ...
Loading ...