Loading ...
Loading ...
Loading ...
5 CHECK FI CAM FUNCTION
No Tools
1. Adjust accelerator wire. Refer to “Adjust Accelerator Wire”, FE-3.
2. Disconnect engine coolant temperature sensor harness connector and check resistance as shown in the figure.
SEF536H
3. Warm up engine until the resistance of coolant temperature sensor is 0.26 to 0.39 kΩ.
4. Turn ignition switch OFF.
5. When engine coolant temperature is 75 to 85°C (167 to 185°F), with the voltage between 1.10 to 1.36V, make sure that
the clearance is less than 0.05 mm (0.002 in), between stopper and throttle adjusting screw as shown in figure.
AEC871A
OK or NG
OK 䊳 GO TO 14.
NG 䊳 1. Replace throttle body assembly. Refer to “OUTER COMPONENT PARTS”, EM-68.
2. GO TO 14.
TROUBLE DIAGNOSIS — BASIC INSPECTION
KA24DE
Basic Inspection (Cont’d)
EC-106
Loading ...
Loading ...
Loading ...