Loading ...
Loading ...
Loading ...
SEF970R
쐌 If NG, adjust by turning adjusting screw.
Lock nut:
: 0.98 - 1.96 N·m (10 - 20 kg-cm, 8.7 - 17.4 in-lb)
SEF971R
4. Start engine and warm it up.
5. When engine coolant temperature is 75 to 85°C (167 to
185°F), check the following.
쐌 The center of mark A is aligned with mark C.
쐌 The cam follower lever’s roller is not touching the fast idle cam.
쐌 If NG, replace thermo-element and perform the above inspec-
tion and adjustment again.
SEF774U
Without CONSULT-II
NGEC0548S02
1. Turn ignition switch ON.
2. Check voltage between ECM terminal 59 (Engine coolant tem-
perature sensor signal) and ground.
3. When the voltage is between 3.12 to 3.52V, make sure that the
center of mark A is aligned with mark B as shown in the fig-
ure.
SEF970R
쐌 If NG, adjust by turning adjusting screw.
Lock nut:
: 0.98 - 1.96 N·m (10 - 20 kg-cm, 8.7 - 17.4 in-lb)
SEF971R
4. Start engine and warm it up.
5. When the voltage is between 1.10 to 1.36V, check the follow-
ing.
쐌 The center of mark A is aligned with mark C.
쐌 The cam follower lever’s roller is not touching the fast idle cam.
쐌 If NG, replace thermo-element and perform the above inspec-
tion and adjustment again.
BASIC SERVICE PROCEDURE
VG33E
Fast Idle Cam (FIC) (Cont’d)
EC-640
Loading ...
Loading ...
Loading ...