Loading ...
Loading ...
Loading ...
9 ADJUSTMENT CLOSED THROTTLE POSITION SWITCH IDLE POSITION-II
1. Turn ignition switch ON.
2. Select “CLSD THL/P SW” in “DATA MONITOR” mode.
3. Insert 0.3 mm (0.012 in) feeler gauge between throttle adjust screw and throttle drum as shown in the figure.
LEC517
4. Open throttle valve and then close.
5. Check “CLSD THL/P SW” signal.
SEF305Y
“CLSD THL/P SW” signal should remain “OFF” when the throttle valve is closed.
OK or NG
OK 䊳 GO TO 10.
NG 䊳 GO TO 8.
10 ADJUSTMENT THROTTLE POSITION SWITCH IDLE POSITION-III
With CONSULT-II
Turn throttle position sensor body clockwise until “CLSD THL/P SW” signal switches to “OFF”.
SEF689W
䊳 GO TO 11.
TROUBLE DIAGNOSIS — BASIC INSPECTION
VG33E
Basic Inspection (Cont’d)
EC-698
Loading ...
Loading ...
Loading ...