Loading ...
Loading ...
Loading ...
Name Description
Network
Configuration
The network settings of the hardware. To adjust the network settings, select
Configure on page 207.
Configure
Specify the Internet Protocol (for supported hardware devices) using the IPversion
dropdown list.
l
For IPv4, the values must be in the format: (0-999).(0-999).(0-999).(0-999)
l
For IPv6, the values must be in the format of eight groups of hexadecimal
digits each separated by a colon. The subnet mask must be a number
between 0-128.
The Check button tests whether there is currently another hardware device in the
system that is using the entered IP address.
Check cannot detect conflicts with hardware devices that are
turn off, outside of the XProtect VMS system, or otherwise
momentarily not responding.
User name
The user name and level used to connect to the hardware. Select another user from
the dropdown list and add a new password using the Password field described
below.
Add or delete users using the underlined actions at the bottom of the
Authentication section (see Add a user on page 208 or Delete users on page 208).
Selecting a user that does not have the highest user level
specified by the manufacturer could result in some features
not being available.
Password
The password used to connect to the hardware. View the currently entered text using
the Reveal
icon.
When changing the password, consult the manufacturer's documentation for the
password rules for the specific hardware device, or use the Generate Password
icon to automatically generate a password that matches the requirements.
Administrator manual | XProtect® VMS 2023 R1
207 | Configuration
Loading ...
Loading ...
Loading ...