Loading ...
Loading ...
Loading ...
1. To enable public access, select the Enable public access check box.
2. Define the recording server's public address. Enter the address of the firewall or NAT router so clients
that access the surveillance system from the Internet can connect to the recording servers.
3. Specify a public port number. It is always a good idea that port numbers used on the firewall or NAT
router are different from the ones used locally.
If you use public access, configure the firewall or NAT router so requests sent to the
public address and port are forwarded to the local address and port of relevant
recording servers.
Assign local IP ranges
You define a list of local IP ranges which the surveillance system should recognize as coming from a local
network:
l
On the Network tab, click Configure
Filter the device tree
The device tree in the Overview pane can become very large if you have many registered devices. You can
filter the device tree to easier locate the devices you want to work with.
By providing filter terms that are unique to a few specific devices, you can effectively only display these specific
devices.
Filter the device tree
l
In the top of the Overview pane, click Filter to open the Filter tab.
l
In the Type here to filter devices field, enter one or more filter criteria and click Apply filter to filter the
device list.
Filter criteria characteristics
The filter criteria are applied to the device name, device short name, hardware address (IP), device ID, and
hardware ID field values.
Partial filter matches are not displayed when filtering hardware ID and device ID field values. As a result, you
must define the complete and exact identification number when filtering by hardware ID or device ID.
Partial filter matches are displayed for device name, device short name, and hardware address field values, so
the filter term “camer” will display all devices that contain the word “camera” in the device name.
Filter criteria are not case sensitive, using "camera" or "Camera" as filter criteria will yield
the same results.
Administrator manual | XProtect® VMS 2023 R1
199 | Configuration
Loading ...
Loading ...
Loading ...