Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
693User Manual 1335.5337.02 ─ 05
Parameters:
<ClockSource> D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | D11 | D12 |
D13 | D14 | D15
Clock channel
*RST: D0
Usage: Asynchronous command
Manual operation: See "Clock source" on page 352
PBUS<pb>:CLON <Clocked>
Defines if the bus is a clocked bus - one of the digital channels serves as clock of the
bus.
Suffix:
<pb>
.
1 | 2
Selects the logic. The clocked bus is available on Logic 1 and 2.
Parameters:
<Clocked> ON | OFF
*RST: OFF
Usage: Asynchronous command
Manual operation: See "Bus clocked" on page 352
PBUS<pb>:CLSLope <ClockSlope>
Selects the slope of the clock signal at which all digital channels of the bus are ana-
lyzed.
Suffix:
<pb>
.
1 | 2
Selects the logic. The clocked bus is available on Logic 1 and 2.
Parameters:
<ClockSlope> POSitive | NEGative | EITHer
*RST: POSitive
Usage: Asynchronous command
Manual operation: See "Clock slope" on page 352
PBUS<pb>:DIGSignals:POSition <DigChanPosition>
Sets the vertical position of all active digital channels.
Suffix:
<pb>
.
1...4, index of the logic group
Mixed signal option (option R&S MXO4-B1)
Loading ...
Loading ...
Loading ...