Loading ...
Loading ...
Loading ...
Trigger
R&S
®
MXO 4 Series
139User Manual 1335.5337.02 ─ 05
Level
See "Level" on page 135.
Remote command:
TRIGger:EVENt<ev>:LEVel<n>[:VALue] on page 458
Slope
Sets the edge direction for the trigger.
"Positive"
Selects the rising edge, which is a positive voltage change.
"Negative"
Selects the falling edge, which is a negative voltage change.
"Either"
Selects the rising and falling edge. After starting an acquisition, the
instrument triggers on the first identified edge.
Remote command:
TRIGger:EVENt<ev>:EDGE:SLOPe on page 461
7.4.2 Edge trigger on external trigger source
Access: "Menu" > "Trigger" > "Setup" tab > "Source" = "Extern" > "Type = Analog
Edge"
If an external trigger signal is connected to the Trigger In connector, and the trigger
source is set to "Extern", the analog edge trigger is available. Triggering on an external
source is only possible if you trigger on a single event but not for sequences.
Trigger types
Loading ...
Loading ...
Loading ...