Loading ...
Loading ...
Loading ...
Protocol analysis
R&S
®
MXO 4 Series
296User Manual 1335.5337.02 ─ 05
●
Bytes with missing acknowledge bit
●
Specific data pattern in the message
13.3.2 I²C configuration
13.3.2.1 I²C configuration settings
Access: [Apps] key > "Protocol" tab > "I2C" > "Setup".
Make sure that the tab of the correct serial bus is selected.
Protocol type
Displays the protocol type to be decoded.
Remote command:
SBUS<sb>:TYPE on page 589
State
Enables the decoding of the selected bus. The signal icon of the bus appears on the
signal bar.
SDA source
Sets the source channel to which the data line is connected.
I²C (option R&S
MXO4-K510)
Loading ...
Loading ...
Loading ...