Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
569User Manual 1335.5337.02 ─ 05
CALCulate:SPECtrum<sp>:PLISt:SOURce <Source>
Selects the source of the peak table. You can select one of the traces that is enabled
with Traces.
Suffix:
<sp>
.
1
Parameters:
<Source> SPECMAXH1 | SPECMINH1 | SPECNORM1 | SPECAVER1
Usage: Asynchronous command
Manual operation: See "Source" on page 239
CALCulate:SPECtrum<sp>:PLISt:SPOW <ShwPeaksOnWfm>
Displays a box with a description for each detected peak in the spectrum, including the
magnitude.
If CALCulate:SPECtrum<sp>:PLISt:LABel:FREQuency[:STATe] is ON, the fre-
quency values are also displayed.
Suffix:
<sp>
.
1
Parameters:
<ShwPeaksOnWfm> ON | OFF
*RST: OFF
Usage: Asynchronous command
Manual operation: See "Peak on waveform" on page 237
CALCulate:SPECtrum<sp>:PLISt:RESult[:VALue]?
Returns the current peak list measurement results.
Suffix:
<sp>
.
1
Usage: Query only
Asynchronous command
CALCulate:SPECtrum<sp>:PLISt:SORT:COLumn <ResultColumn>
Sorts the results in the spectrum peak list table either according to the frequency or
according to the value.
Suffix:
<sp>
.
1
Spectrum analysis
Loading ...
Loading ...
Loading ...