Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
615User Manual 1335.5337.02 ─ 05
TRIGger:I2C:DRNack <DataReadNack>
Triggers on the end of the read process when the master reads data from the slave.
This Nack is sent according to the protocol definition, it is not an error.
Parameters:
<DataReadNack> ON | OFF
*RST: ON
Usage: Asynchronous command
Manual operation: See "No Ack conditions" on page 303
TRIGger:I2C:DWNack <DataWriteNack>
Triggers if a date acknowledge bit is missing - the addressed slave does not accept the
data.
Parameters:
<DataWriteNack> ON | OFF
*RST: ON
Usage: Asynchronous command
Manual operation: See "No Ack conditions" on page 303
17.16.3.3 Filter
There are two commands for each parameter, that you can use for defining the I2C
settings.
For example, to set the Frame type =WRITe > Field =Address >Data value you can
use one of the following commands:
●
SBUS:I2C:FILTer:FRAMe1:FLD1:DMIN 01100
Defines the parameter by using the index <m> for the frame number and <n> for
the field number.
●
SBUS:I2C:FILTer:DMIN "WRITe", "Address", 01100
Defines the parameter by using the frame and field name.
SBUS<sb>:I2C:FILTer:ENABle........................................................................................ 616
SBUS<sb>:I2C:FILTer:FRENable.....................................................................................616
SBUS<sb>:I2C:FILTer:FRAMe<fr>:ENABle.......................................................................616
SBUS<sb>:I2C:FILTer:DMAX.......................................................................................... 616
SBUS<sb>:I2C:FILTer:FRAMe<fr>:FLD<fl>:DMAX............................................................ 616
SBUS<sb>:I2C:FILTer:DMIN........................................................................................... 617
SBUS<sb>:I2C:FILTer:FRAMe<fr>:FLD<fl>:DMIN............................................................. 617
SBUS<sb>:I2C:FILTer:DOPerator.................................................................................... 617
SBUS<sb>:I2C:FILTer:FRAMe<fr>:FLD<fl>:DOPerator...................................................... 617
SBUS<sb>:I2C:FILTer:ERENable.................................................................................... 617
SBUS<sb>:I2C:FILTer:ERRor<n>:ENABle........................................................................ 617
SBUS<sb>:I2C:FILTer:IMAX............................................................................................618
SBUS<sb>:I2C:FILTer:FRAMe<fr>:FLD<fl>:IMAX..............................................................618
Protocols
Loading ...
Loading ...
Loading ...