Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
398User Manual 1335.5337.02 ─ 05
Waveform Description
PBUS1 | PBUS2 | PBUS3 | PBUS4 Digital buses (option R&S MXO4-B1)
SPECMAXH1 | SPECMINH1 | SPECNORM1 |
SPECAVER1
Spectrum traces:
SPECMAXH1 : Spectrrum1 maxhold
SPECMINH1: Spectrrum1 minhold
SPECNORM1: Spectrrum1 normal
SPECAVER1: Spectrrum1 average
17.3.2 Slope parameter
The slope parameter is used with several trigger and search condition commands.
Slope Description
POSitive Rising edge, which is a positive voltage change.
NEGative Falling edge, which is a negative voltage change.
EITHer Rising as well as the falling edge.
17.3.3 Polarity parameter
The polarity parameter is used with several trigger and search condition commands.
Polarity Description
POSitive Positive going pulses.
NEGative Negative going pulses.
EITHer Both positive and negative going pulses.
17.4 Programming examples
17.4.1 SmartGrid layout with zoom
The following example uses 3 sine waves, all with frequency 20 MHz and an amplitude
of ±0.4 V. The vertical scale is 100 mV/div, the time scale is 20 ns/div.
In the example, 2 layouts (diagram sets) are created, waveforms are assigned, and
zoom and spectrum are added.
For a description of the commands, see:
●
Chapter 17.7.2, "SmartGrid", on page 410
●
Chapter 17.10.1, "Zoom", on page 490
Programming examples
Loading ...
Loading ...
Loading ...