Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
426User Manual 1335.5337.02 ─ 05
Usage: Setting only
Asynchronous command
Manual operation: See "[Run / Stop]" on page 36
RUNSingle
SINGle
Starts a defined number of acquisition cycles. The number of cycles is set with
ACQuire:COUNt.
Usage: Setting only
Asynchronous command
Manual operation: See "[Single]" on page 36
STOP
Stops the running acquisition.
Usage:
Event
Asynchronous command
Manual operation: See "[Run / Stop]" on page 36
17.8.2 Horizontal setup
AUToscale.....................................................................................................................426
TIMebase:SCALe...........................................................................................................426
TIMebase:RANGe..........................................................................................................427
TIMebase:DIVisions?......................................................................................................427
TIMebase:HORizontal:POSition.......................................................................................427
TIMebase:REFerence.....................................................................................................428
AUToscale
Performs an autoset process: analyzes the enabled channel signals, and obtains
appropriate horizontal, vertical, and trigger settings to display stable waveforms.
Rohde & Schwarz does not recommend using the autoset in remote control. To adjust
the oscilloscope remotely, especially for automated testing applications, use the
remote commands that adjust the horizontal, vertical and trigger settings.
Usage:
Event
Asynchronous command
TIMebase:SCALe <TimebaseScale>
Sets the horizontal scale, the time per division, for all waveforms in the time domain,
for example, channel and math waveforms.
Acquisition and setup
Loading ...
Loading ...
Loading ...