Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
541User Manual 1335.5337.02 ─ 05
MEASurement<mg>:GATE <Gate>
Sets the gate of the indicated measurement. Enable a gate before you assign a mea-
surement to it (GATE<g>:ENABle =ON).
The query returns 0, if no gate is assigned.
Suffix:
<mg>
.
1...16, index of the measurement
Parameters:
<Gate> Number of the gate to be used
Usage: Asynchronous command
Manual operation: See "Measurements gated by G1/G2" on page 208
17.12.6 Reference levels
REFLevel<rl>:LMODe.................................................................................................... 541
REFLevel<rl>:ABSolute:HYSTeresis................................................................................ 541
REFLevel<rl>:ABSolute:LLEVel.......................................................................................542
REFLevel<rl>:ABSolute:MLEVel...................................................................................... 542
REFLevel<rl>:ABSolute:ULEVel...................................................................................... 542
REFLevel<rl>:RELative:HYSTeresis.................................................................................543
REFLevel<rl>:RELative:LOWer....................................................................................... 543
REFLevel<rl>:RELative:MIDDle.......................................................................................543
REFLevel<rl>:RELative:MODE........................................................................................544
REFLevel<rl>:RELative:UPPer........................................................................................544
REFLevel<rl>:LMODe <LevelMode>
Defines if the reference level is set in absolute or relative values.
Suffix:
<rl>
.
1...4, index of the reference level
Parameters:
<LevelMode> ABS | REL
*RST: REL
Usage: Asynchronous command
Manual operation: See "Level mode" on page 210
REFLevel<rl>:ABSolute:HYSTeresis <HystAbs>
Defines a hysteresis for the middle reference level. A rise or fall from the middle refer-
ence value that does not exceed the hysteresis is rejected as noise.
Suffix:
<rl>
.
1...4, index of the reference level
Automatic measurements
Loading ...
Loading ...
Loading ...