Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
445User Manual 1335.5337.02 ─ 05
Return values:
<Name> Name string
Usage: Query only
Asynchronous command
Manual operation: See "Predefined probe, name and type of the probe"
on page 118
PROBe<ch>:SETup:STATe?
Queries if the probe at the specified input channel is active (detected) or not active (not
detected). To switch the probe on, use CHANnel<ch>:STATe.
Suffix:
<ch>
.
1 to 4, index of the analog channel
Return values:
<State> DETected | NDETected
*RST: NDETected
Usage: Query only
Asynchronous command
Manual operation: See "Predefined probe, name and type of the probe"
on page 118
PROBe<ch>:SETup:TYPE?
Queries the type of the probe.
Suffix:
<ch>
.
1 to 4, index of the analog channel
Return values:
<Type> String containing one of the following values:
– None (no probe detected)
– Passive Probe
– active single-ended
Usage: Query only
Asynchronous command
Manual operation: See "Predefined probe, name and type of the probe"
on page 118
17.8.8.2 Settings for active voltage probes
The probe suffix <ch> selects the input channel to which the probe is connected.
PROBe<ch>:SETup:MODE.............................................................................................446
PROBe<ch>:SETup:ACCoupling..................................................................................... 447
PROBe<ch>:SETup:CMOFfset........................................................................................447
PROBe<ch>:SETup:DISPlaydiff.......................................................................................447
Acquisition and setup
Loading ...
Loading ...
Loading ...