Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
523User Manual 1335.5337.02 ─ 05
ALL
Complete waveform, which is usually longer than the displayed
waveform.
CURSor
Data between the cursor lines if a cursor measurement is
defined for the source waveform.
GATE
Data included in the measurement gate if a gated measurement
is defined for the source waveform.
MANual
Saves the data between user-defined start and stop values to be
set with EXPort:WAVeform:STARt and EXPort:WAVeform:
STOP.
*RST:
DISPlay
Example: See Chapter 17.4.3, "Data transfer in roll mode", on page 403.
Usage: Asynchronous command
Manual operation: See "Export mode" on page 262
EXPort:WAVeform:SOURce <Source>
Selects the waveform to be exported to file.
Parameters:
<Source> C1 | C2 | C3 | C4 | D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9
| D10 | D11 | D12 | D13 | D14 | D15 | M1 | M2 | M3 | M4 | M5 |
R1 | R2 | R3 | R4 | SPECMAXH1 | SPECMINH1 | SPECNORM1
| SPECAVER1
Usage: Asynchronous command
Manual operation: See "Source" on page 262
EXPort:WAVeform:STARt <Start>
Sets the start time value of the waveform section for export, if EXPort:WAVeform:
SCOPe on page 522 is set to Manual.
Parameters:
<Start> Range: -1E+26 to 1E+26
Increment: 0.01
*RST: 0.01
Default unit: s
Usage: Asynchronous command
Manual operation: See "Export mode" on page 262
Data management
Loading ...
Loading ...
Loading ...