Loading ...
Loading ...
Loading ...
Data and file management
R&S
®
MXO 4 Series
262User Manual 1335.5337.02 ─ 05
Source
Selects the waveform to be exported. The list shows all active waveform that can be
exported.
Remote command:
EXPort:WAVeform:SOURce on page 523
Export mode
Defines the part of the waveform record that has to be stored.
"Display"
Saves the waveform data that is displayed in the diagram.
"All data"
Saves the complete waveform record.
"Cursor"
Saves the data between the cursor lines if at least one cursor mea-
surement is defined for the source waveform. If several cursor sets
are defined, select the "Cursor set" to be used for export.
"Gate"
Saves the data included in the measurement gate if a gated mea-
surement is defined for the source waveform. Select the "Gate" to be
used for export.
"Manual"
Saves the data between user-defined "Start" and "Stop" values.
Remote command:
EXPort:WAVeform:SCOPe on page 522
EXPort:WAVeform:CURSorset on page 524
EXPort:WAVeform:GATE on page 524
EXPort:WAVeform:STARt on page 523
EXPort:WAVeform:STOP on page 524
Save settings
Defines the details of the filename, extension and directory.
"File name"
Sets a name for the file, without extension.
"Extension"
Selects the format of the exported file.
You can select between "Excel-CSV-File (*.csv)" and a "Reference
Waveform Format (*.ref)". REF files can be reloaded as reference
waveforms. See also: Chapter 12.2.3, "Waveform export files",
on page 264.
"Directory"
Opens a file explorer where you can select the directory where the
file is saved.
"Save as"
Opens a file explorer where you can select the directory and enter the
filename.
"Save"
Saves the file in the defined "Directory" using the defined "File name".
If the specified file already exists, it is overwritten with the new data.
Remote command:
EXPort:WAVeform:NAME on page 522
EXPort:WAVeform:SAVE on page 522
Save and recall waveform data
Loading ...
Loading ...
Loading ...