Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
648User Manual 1335.5337.02 ─ 05
TRIGger:CAN:XDATa:SDT:MIN....................................................................................... 655
TRIGger:CAN:XDATa:SEC..............................................................................................655
TRIGger:CAN:XDATa:VCID:CONDition............................................................................ 655
TRIGger:CAN:XDATa:VCID:MAX.....................................................................................656
TRIGger:CAN:XDATa:VCID:MIN......................................................................................656
TRIGger:CAN:TYPE <Type>
Selects the trigger type for CAN analysis.
Parameters:
<Type> STOF | EDOF | FTYP | ID | IDDT | ERRC
STOF
STart Of Frame: triggers on the first edge of the dominant SOF
bit (synchronization bit).
FTYP
Frame TYPe: triggers on a specified frame type and on the iden-
tifier format.
ID
IDentifier: Sets the trigger to one specific identifier or an identi-
fier range.
To set the identifier, use TRIGger:CAN:ICONdition
,TRIGger:CAN:IMAX, and TRIGger:CAN:IMIN.
IDDT
IDentifier and DaTa: Combination of identifier and data condi-
tions To set the identifier condition, use TRIGger:CAN:
ICONdition, TRIGger:CAN:IMIN, and TRIGger:CAN:IMAX.
To set the data condition, use TRIGger:CAN:DCONdition and
TRIGger:CAN:DMIN.
ERRC
ERRor Condition: Define the error types with:
TRIGger:CAN:ACKerror
TRIGger:CAN:BITSterror
TRIGger:CAN:CRCerror
TRIGger:CAN:FORMerror
TRIGger:CAN:FDATa:SCERror
*RST:
STOF
Usage: Asynchronous command
Manual operation: See "Type" on page 327
TRIGger:CAN:DCONdition <DataOperator>
Sets the operator to set a specific data pattern or a data pattern range.
Protocols
Loading ...
Loading ...
Loading ...