Loading ...
Loading ...
Loading ...
Figure B-3 Maximum Elevaon Angle Adjustment
5.
Click up and down direcon keys in the PTZ list to adjust the maximum elevaon angle, and then
you need to click to save the sengs.
6.
Adjust the cursor to Exit to exit the menu.
Note
You need to reset the speed dome inial posion aer the maximum elevaon angle
adjustment.
B.4 What Makes a Failed Arming?
The following two condions will make a failed arming:
●
In the E-Map page, click Finish to exit the eding mode. If there is a moving target in the warning
zone when you click Arm Radar → Arm All Radars to arm radars, it is impossible to enable
mandatory arming,
resulng in failed arming.
●
The current status of radar is oine.
B.5 How to Raise the Precision of Camera Tracking?
●
Check if the speed dome inial posion is set, if not, please set the speed dome inial posion.
●
Check if the
calibraon points are correct. Pay aenon to the situaon that the target is
intercepted when calibrang. If the calibraon points are error, please calibrate again.
●
Check if the
calibraon posions is equally distributed when you set the mul-point calibraon.
●
Do not move the speed dome manually aer the calibraon. If the speed dome is manually
moved, please reset the inial posion of the speed dome and then calibrate again.
Security Radar User Manual
89
Loading ...
Loading ...