Hikvision DS-TDSB0G-FK/500M User Manual

Loading ...

It is applicable to the railway scenes in which radars are constructed around the railway to

lter the trains.

Jail Mode

It is applicable to the jail scenes with the width of 5 m to detect persons.

Enable Debugging Mode.

Aer it is enabled, the number of targets detected by the radar, target speed, posion, and

other

informaon will be superimposed into the stream, which is mainly used for device

debugging and maintenance.

Click Set to save the

sengs.

Oponal: Click Restore Default to restore the sengs to the default.

8.2 Set Frequency Range

Select the radar and click in the client soware, or enter the IP address of the radar in the

address bar of the web browser. Go to Radar → Parameter Cong → Radar Sengs → Frequency

Range

Sengs .

Figure 8-2 Set Frequency Range

The radar supports mulple frequency bands. You can select one according to the actual needs.

Click Set to save the

sengs.

Note

●

When mulple radars cover the same area, co-frequency interference can be reduced by seng

dierent frequency bands.

●

Try to avoid overlapping radar detecon areas.

8.3 Set Panorama Tracking

You can arrange mulple radars for linkage detecon and set the main-sub radar relaonship.

Before You Start

There are at least 2 online radars.

Steps

Select the radar and click in the client soware, or enter the IP address of the radar in the

address bar of the web browser. Go to Radar → Parameter

Cong → Radar Sengs →

Panorama Tracking Sengs to enter the page.

Security Radar User Manual

Loading ...

Hikvision DS-TDSB0G-FK/500M 500m Security Radar