Loading ...
Loading ...
Loading ...
1) Click on the radar detecon area to draw a trigger line.
2) Select Le -> Right, Le <- Right or Le <-> Right in the pop-up window.
3) Enter the distance between two lines. (Only for Dual-trigger Line)
Figure 4-26 Draw a Trigger Line
Note
The actual radar detecon area varies according to dierent radar model.
Note
●
Direcon determinaon: Set the starng point as the center of the circle, the trigger line is
clockwise to the right, and counterclockwise to the le.
●
Up to 4 trigger lines can be drawn. (1 dual-trigger line is equal to 2 trigger lines)
●
Up to 1 dual-trigger line can be drawn.
●
Trigger line rule: A single arrow -> indicates that the target triggers an alarm when it crosses
the trigger line in the
direcon of the arrow; a double arrow <-> indicates that the target
triggers an alarm when it crosses the trigger line in any direcon.
●
The trigger line cannot cross each other.
4.
Click OK to complete the drawing.
5.
Oponal: Double click on the trigger line to enter the trigger line eding mode.
-
Add a Marker: Put the cursor on the edge of the zone and it will change to a cross, click to
add a marker.
Security Radar User Manual
34
Loading ...
Loading ...
Loading ...