Loading ...
Loading ...
Loading ...
For the parameters with the sign , rotate the multifunction knob on the front
panel and then press it down to select the parameter item or modify the parameter
value.
Method 3:
For the parameters with displayed on the menu, rotate the multifunction knob
on the front panel directly to set the parameter, or press down the multifunction knob
or the specified menu softkey, and then the numeric keypad is shown in
Figure
4.21
below.
Parameter Input Field
Delete Key
Max. Value
Min. Value
Default Value
Clear Key
Figure 4.21 Numeric Keypad
In the numeric keypad, rotate the multifunction knob
to select the parameter, then
press down the knob to select it. Then input the value or the unit. You can also enable
the touch screen and tap the value or unit in the numeric keypad to input them. After
you input all the values and select the desired units, the numeric keypad is turned off
automatically. This indicates that you have completed parameter setting. Besides,
after you have input the values, you can also press OK directly to confirm the input
and close the numeric keypad. At this time, the unit of the parameter is the default
unit. In the numeric keypad, you can also perform the following operations:
• Delete the parameter value that has been input.
• Set the parameter to a maximum or minimum value (sometimes, the maximum
or minimum value are the specified one for the current state).
• Set the parameter to a default value.
• Clear the parameter input field.
Method 4:
Quick Start
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
41
Loading ...
Loading ...
Loading ...