Loading ...
Loading ...
Loading ...
• Press Scale to set the vertical scale of the operation results. For setting methods,
refer to the descriptions in "
Parameter Setting Method
". You can also directly
rotate Wave Vertical SCALE or enable the touch screen to adjust the vertical
Scale.
• Press More > AutoSetting to adjust the vertical scale and offset of the
operation results to an optimal value based on the current configuration, so as
to better observe.
• Press More > Invert to enable or disable the inverted display function of the
waveform.
• Press More > Expand to expand or compress waveform around the "Center" or
"GND".
• Press More > Label to set the label for math operation results. For details, refer
to descriptions in "
Math Operation Label
".
• Press More > Color Grade to enable or disable the color grade display of the
operation results. When enabled, different colors are displayed on the screen to
indicate the times of data acquisition or acquisition probability.
• Press More > Reset ColorGrade to clear the color grade display and display the
color grade again.
9.1.23 Math Operation Label
Press Label to enter the label setting menu.
• Press Display continuously to enable or disable the label display of the
waveform. If it is enabled, the label will be displayed at the left side of the
waveform.
• Press Library to select the preset waveform label, including ADD, SUB, MUL, DIV,
FFT, AND, OR, XOR, NOT, Intg, Diff, Sqrt, Lg, Ln, Exp, Abs, LPas, HPas, BPas, Bstop,
and AX+B.
• Press Label, and the label editing interface is automatically displayed. You can
input the label manually. For details, refer to descriptions in "
Channel Label
".
Operations and Measurements
170
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Loading ...
Loading ...
Loading ...