Loading ...
Loading ...
Loading ...
9.1.8 "XOR" Operation
Performs logic "XOR" operation on the waveform voltage values of the specified
sources point by point and displays the results. In operation, when the voltage value
of the source channel is greater than the threshold of the corresponding channel, it is
regarded as logic "1"; otherwise it is logic "0". The results of logic OR operation of
two binary bits are shown in
Table 9.4 Logic "XOR" Operation
.
Table 9.4 Logic "XOR" Operation
A B A^B
0 0 0
0 1 1
1 0 1
1 1 0
Press > Math1 > Operator to select "A^B":
• Press Operation continuously to enable or disable the "A^B" operation function.
• Press SourceA and SourceB respectively, and rotate the multifunction knob
to select the channel for SourceA and SourceB. Then press down the knob to
select the channel. You can also press SourceA and SourceB continuously or
enable the touch screen to select the channel. The available channels for
SourceA and SourceB are CH1-CH4 and D0-D15.
NOTE
Only the channels that have been enabled currently can be selected.
- If Source A (or Source B) selects CH1, press More > Thre.CH1 to set the
threshold of Source A (or Source B) in logic operation. For setting methods,
refer to descriptions in "
Parameter Setting Method
".
- If Source A (or Source B) selects CH2, press More > Thre.CH2 to set the
threshold of Source A (or Source B) in logic operation. For setting methods,
refer to descriptions in "
Parameter Setting Method
".
- If Source A (or Source B) selects CH3, press
More > Thre.CH3 to set the
threshold of Source A (or Source B) in logic operation. For setting methods,
refer to descriptions in "
Parameter Setting Method
".
- If Source A (or Source B) selects CH4, press More > Thre.CH4 to set the
threshold of Source A (or Source B) in logic operation. For setting methods,
refer to descriptions in "
Parameter Setting Method
".
Operations and Measurements
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
151
Loading ...
Loading ...
Loading ...