Loading ...
Loading ...
Loading ...
position of the reference waveform, or the vertical display position of the bus
decoding.
• Wave Vertical SCALE: indicates the waveform vertical scale knob. Rotate the
knob to adjust the vertical scale of math operation waveform or the vertical scale
of the reference waveform, and also can adjust the size of the displayed digital
channel waveforms.
4.6.4 Trigger
• : Press this key to open the trigger operation menu.
This oscilloscope provides various trigger types.
• : Press this key to switch the trigger mode to Auto,
Normal, or SINGLE.
• : Press this key to generate a trigger signal forcibly.
• Trigger LEVEL: modifies the trigger level/threshold level.
Turn it clockwise to increase the level, and turn it
counterclockwise to decrease the level. During the
modification, the trigger level line would move up and down
and the trigger level/threshold level value at the upper-right
corner of the screen would change accordingly. Press down
the knob to quickly set the trigger level to 50% of the
waveform peak-peak value.
4.6.5 Clear
Press this key to clear all the waveforms on the screen. If the
oscilloscope is in the "RUN" state, new waveforms will continue
being displayed.
4.6.6 Auto
Press this key to enable the waveform auto setting function.
The oscilloscope will automatically adjust the vertical scale,
horizontal time base, and trigger mode according to the input
signal to realize optimal waveform display.
Quick Start
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
29
Loading ...
Loading ...
Loading ...