Loading ...
Loading ...
Loading ...
A B A&&B
1 1 1
Press > Math1 > Operator to "A&&B":
• Press Operation continuously to enable or disable the "AND" function.
• Press SourceA and SourceB respectively, and rotate the multifunction knob
to select the channel for SourceA and SourceB. Then press down the knob to
select the channel. You can also press SourceA and SourceB continuously or
enable the touch screen to select the channel. The available channels for
SourceA and SourceB are CH1-CH4 and D0-D15.
NOTE
Only the channels that have been enabled currently can be selected.
- If Source A (or Source B) selects CH1, press More > Thre.CH1 to set the
threshold of Source A (or Source B) in logic operation. For setting methods,
refer to descriptions in "
Parameter Setting Method
".
- If Source A (or Source B) selects CH2, press More > Thre.CH2 to set the
threshold of Source A (or Source B) in logic operation. For setting methods,
refer to descriptions in "
Parameter Setting Method
".
- If Source A (or Source B) selects CH3, press More > Thre.CH3 to set the
threshold of Source A (or Source B) in logic operation. For setting methods,
refer to descriptions in "
Parameter Setting Method
".
- If Source A (or Source B) selects CH4, press More > Thre.CH4 to set the
threshold of Source A (or Source B) in logic operation. For setting methods,
refer to descriptions in "
Parameter Setting Method
".
TIP
The thresholds of the digital channels (D0-D15) are respectively set in the LA
module.
• Press Offset, then rotate the multifunction knob to set the vertical offset of
the operation results. You can also directly rotate Wave Vertical POSITION or
enable the touch screen to adjust the vertical offset.
• Press Size, then rotate the multifunction knob to select the waveform size,
and press down the knob to select the size. You can also press Size continuously
or enable the touch screen to select the channel. The available sizes include
Operations and Measurements
148
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Loading ...
Loading ...
Loading ...