Loading ...
Loading ...
Loading ...
Press Start Freq, then rotate the multifunction knob or use the pop-up
numeric keypad to set the start frequency. Press End Freq, then rotate the
multifunction knob or use the pop-up numeric keypad to set the end
frequency. By default, the start frequency is 100 Hz, and the end frequency is
1 kHz. The ranges of start frequency and end frequency for different sweep
waveforms are different. The generator will restart to sweep and output from
the specified "Start Frequency" after "Start Frequency" or "End Freq" is
modified.
- Start Keep
Start keep indicates the time that the output signal keeps outputting at the
"Start Freq" after the sweep starts. After the start keep time expires, the
generator will continue outputting with varied frequencies according to the
current sweep type.
Press Start Keep, then rotate the multifunction knob or use the pop-up
numeric keypad to set the start keep time. The default is 0 s, and the range is
from 0 s to 500 s.
- End Keep
End Keep indicates the time that the output signal continues outputting at the
"End Freq" after the generator sweeps from "Start Freq" to "End Freq".
Press End Keep, then rotate the multifunction knob or use the pop-up
numeric keypad to set the end keep time. The default is 0 s, and the range is
from 0 s to 500 s.
- Set the step
When the sweep type is set to "Step", this menu is enabled and can be settable.
Press Step number, then rotate the multifunction knob or use the numeric
keypad to set the step value. By default, it is 2. Its available range is from 2 to
1,000.
- Set the trigger source
The trigger sources of the sweep can be Internal or Manual. The generator will
generate a sweep output when a trigger signal is received, and then it waits for
the next trigger signal.
Press
Trig Source and rotate the multifunction knob to select the desired
trigger source, and then press down the knob to select it. You can also press
Trig Source continuously or enable the touch screen to select it. The available
trigger sources include Internal or Manual.
- Internal: The Function/Arbitrary Waveform Generator outputs continuous
sweep waveform.
Function/Arbitrary Waveform Generator (Option)
320
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Loading ...
Loading ...
Loading ...