Loading ...
Loading ...
Loading ...
Track Measurement (after Horizontal Expansion):
9.3.3 XY Mode
XY mode is only available when the horizontal time base mode is "XY" (refer to
"
Timebase Mode
"). In this mode, two pairs of cursors will appear. You can adjust the
cursor positions to measure the X and Y values at the crossing points of the two pairs
of cursors.
Press Mode to select "XY" to enable the XY cursor measurement function. The
measurement results will be displayed at the upper-left corner of the screen, as
shown in the following figure.
Operations and Measurements
196
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Loading ...
Loading ...
Loading ...