Loading ...
Loading ...
Loading ...
14.2 To Enable/Disable the Digital Channel
Press On/Off to enter the on/off sub-menu of the digital channel.
• Enable/disable the channels (D7-D0) simultaneously
Press D7-D0 continuously to enable or disable the channels (D7-D0). You can
also enable the touch screen and tap the LA status area. Then the channel and
threshold setting interface is displayed, as shown in the figure below. Tap "D7-
D0" to enable or disable D7-D0 channels. Tap the close icon at the upper-
right corner of the interface to close the interface; or tap the LA status label at
the bottom of the screen to close the interface.
• Enable/disable the channels (D15-D8) simultaneously
Press D15-D8 continuously to enable or disable the channels (D15-D8). You can
also enable the touch screen and tap the LA status area. Then the channel and
threshold setting interface is displayed. Tap "D15-D8" to enable or disable D15-
D8 channels.
• Enable/disable a single digital channel
Press
Dx On/Off to open the channel selection list. Rotate the multi-function
knob
to select a channel, and then press down the knob to enable or
disable it. You can also press Dx On/Off continuously to switch to select any
channel, and press down the multifunction knob to enable or disable the
channel. You can also enable the touch screen to enable or disable the selected
channel. In addition, You can also enable the touch screen and tap the LA status
area. Then the channel and threshold setting interface is displayed. Tap a single
digital channel to enable or disable it.
NOTE
After pressing
D7-D0 to enable or disable D7-D0, you can still disable or enable any
channel among D7-D0 through the Dx On/Off key. After pressing D7-D0 to enable D7-
D0 channels, the D0-D7 channels under Dx On/Off are enabled automatically. The same
is true for D15-D8 channels.
Digital Channel
224
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Loading ...
Loading ...
Loading ...