Loading ...
Loading ...
Loading ...
16.8 To Reset the Reference Waveform
Press More > Reset, and the reference waveform returns to the position where the
source channel waveform is located when the Save operation was executed.
16.9 To Set the Color of the Reference Waveform
This series oscilloscope provides five colors (gray, green, blue, red, and orange) to
mark the reference waveforms of different channels in order to distinguish them.
Press Color, and then rotate the multifunction knob to select the color of the
reference waveform of the channel. You can also press Color continuously or enable
the touch screen to select it. The GND icon and the label at the left side of the
waveform of the currently selected channel will be filled with the specified color. For
example, and .
16.10 To Set the Label
Press More > Label to enter the label setting menu. You can use the built-in label in
the library or manually input a label. Three input methods are available for you to
input a label name, including Chinese, English, and Traditional Chinese.
• Press Display continuously to enable or disable the display of the reference
waveform label. If it is enabled, the label will be displayed at the left side of the
waveform. If the current channel is REFn (n=1,2, …10), then the default label of
the reference waveform is REFn (n=1, 2, …10).
Reference Waveform
282
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Loading ...
Loading ...
Loading ...