Loading ...
Loading ...
Loading ...
Press More > When, then rotate the multifunction knob to select the trigger
condition, and then press down the knob to select it. You can also press When
continuously or enable the touch screen to select it.
• =: triggers when the channel's data value equals the set data value. Press Data
to set the data bit. For setting methods, refer to descriptions in "
I2C Trigger
(Option)
".
• ≠: triggers when the channel's data value does not equal the set data value.
Press Data to set the data bit. For setting methods, refer to descriptions in "
I2C
Trigger (Option)
".
• <: triggers when the channel's data value is smaller than the set data value. Press
Data Max to set the upper limit of the data bit. For setting methods, refer to
descriptions in "
I2C Trigger (Option)
".
• >: triggers when the channel's data value is greater than the set data value. Press
Data Min to set the lower limit of the data bit. For setting methods, refer to
descriptions in "
I2C Trigger (Option)
".
• ><: triggers when the channel's data value is smaller than the upper limit of the
data value and greater than the lower limit of the data value. Press Data Max
and Data Min to set the upper limit and lower limit of the data bit respectively.
For setting methods, refer to descriptions in "
I2C Trigger (Option)
".
• <>: triggers when the channel's data value is greater than the upper limit of the
data value and smaller than the lower limit of the data value. Press Data Max
and Data Min to set the upper limit and lower limit of the data bit respectively.
For setting methods, refer to descriptions in "
I2C Trigger (Option)
".
Width:
Press More > Width, then rotate the multifunction knob or use the pop-up
numeric keypad to set the width. Its range is from 4 to 32.
User Width:
Press More > User Width, then rotate the multifunction knob or use the pop-up
numeric keypad to set the user width. Its range is from 4 to 32.
To Trigger the Oscilloscope
128
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Loading ...
Loading ...
Loading ...