Loading ...
Loading ...
Loading ...
Press Format, rotate the multifunction knob to select the display format of
the bus data. Then, press down the knob to select it. You can also press Format
continuously or enable the touch screen to select it. The available formats
include Hex, Dec, Bin, and ASCII.
- Adjust the vertical position of the bus
Press Position, and then rotate the multifunction knob to adjust the vertical
display position of the bus. You can also rotate Wave Vertical POSITION to
adjust the vertical display position of the bus.
- Set the label display
Press Label to enable or disable the label display of the RS232 decoding bus.
When enabled, the bus label "SPI-MISO" and/or "SPI-MOSI" will be displayed at
the upper-left side of the bus (when the bus display is enabled).
- Set parameters for the event table
Press Event Table to enter the event table setting menu. The event table
displays the decoded data and the corresponding decoding information in time
order in the form of a table. It can be used to observe relatively longer decoded
data. The decoding information includes the decoded data (MISO and/or
MOSI), the corresponding line number, time, and error information (MISO
and/or MOSI).
NOTE
When the source channel of MISO or MOSI is set to "OFF", information of the data line
is not displayed in the data table.
- Open or close the event table: Press Event Table continuously to enable or
disable the display of the event table. When enabled, the following event
table as shown in
Figure 15.8
is displayed. You can also enable the touch
screen to tap the icon at the right-upper corner of the event table to close
it.
Protocol Decoding
252
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Loading ...
Loading ...
Loading ...