Loading ...
Loading ...
Loading ...
• Press Operation continuously to enable or disable the "NOT" function.
• Press SourceA, and rotate the multifunction knob to select the channel for
SourceA. Then press down the knob to select the channel. You can also press
SourceA continuously or enable the touch screen to select the channel. The
available channels for SourceA are CH1-CH4 and D0-D15.
NOTE
Only the channels that have been enabled currently can be selected.
- If Source A selects CH1, press More > Thre.CH1 to set the threshold of
Source A in logic operation. For setting methods, refer to descriptions in
"
Parameter Setting Method
".
- If Source A selects CH2, press More > Thre.CH2 to set the threshold of
Source A in logic operation. For setting methods, refer to descriptions in
"
Parameter Setting Method
".
- If Source A selects CH3, press More > Thre.CH3 to set the threshold of
Source A in logic operation. For setting methods, refer to descriptions in
"
Parameter Setting Method
".
- If Source A selects CH4, press More > Thre.CH4 to set the threshold of
Source A in logic operation. For setting methods, refer to descriptions in
"
Parameter Setting Method
".
• Press Offset, then rotate the multifunction knob to set the vertical offset of
the operation results. You can also directly rotate Wave Vertical POSITION or
enable the touch screen to adjust the vertical offset.
• Press Size, then rotate the multifunction knob to select the waveform size.
Press down the knob to select it. You can also press Size continuously or enable
the touch screen to select the channel. The available sizes include "Small",
"Medium", and "Large". In addition, you can also rotate Wave Vertical SCALE
to adjust the waveform size.
• Press AutoSetting to adjust the vertical scale and offset of the operation results
to an optimal value based on the current configuration, so as to better observe.
• Press More > Sensitivity to set the sensitivity of the digital signal converted
from the analog signal on the source. For setting methods, refer to descriptions
in "
Parameter Setting Method
".
Operations and Measurements
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
153
Loading ...
Loading ...
Loading ...