Loading ...
Loading ...
Loading ...
"ON", then the filename is generated automatically. If the filename that you
input is the same as the existing filename, a prompt message will be displayed,
reminding you that the existing file will be overwritten and asking you whether
to continue or not.
- Press Channel, then the available storage channels include CH1-CH4 and D0-
D15. Only when you select "Memory" under Data Source and the format is
"*.bin" or "*.cvs", can you set the storage channel.
- Press NewFolder to create a new storage folder. For details, refer to
descriptions , in "
To Create a Folder
".
- Press Save to save the set waveform file.
- Press More > Window to enable or disable the display of the disk management
interface.
- Press More > Time information to enable or disable the display of the time
information in the waveform data. If enabled, the time information for the
waveform data will be displayed. If disabled, the time information for the
waveform data will not be displayed.
3. SetupPress Save Setup to enter the setup setting interface.
Save the settings of the oscilloscope to the internal or external memory in "*.stp"
format. When loading, the stored settings can be recalled.
After selecting this type:
- Press File Name to input the file name to be saved. For filename input, refer to
descriptions in "
To Create a Folder
". Press > More > Auto Name to select
"ON", then the filename is generated automatically. If the filename that you
input is the same as the existing filename, a prompt message will be displayed,
reminding you that the existing file will be overwritten and asking you whether
to continue or not.
- Press NewFolder to create a new storage folder. For details, refer to
descriptions , in "
To Create a Folder
".
Store and Load
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
325
Loading ...
Loading ...
Loading ...