Loading ...
Loading ...
Loading ...
a. Press > Load Setup to enter the setup load interface. The disk
management interface is displayed automatically. By default, "Local Disk(C)" is
selected.
b. Rotate the multifunction knob or enable the touch screen to open the
internal memory storage interface.
c. Rotate the multifunction knob to select the desired load location, and then
press down the knob to open it. You can also enable the touch screen to select
the location. Rotate the multifunction knob and select , press down the
knob or enable the touch screen to tap to go to the previous location.
d. Rotate the multifunction knob to select the file to be loaded (the default file
type is in "*stp" format), then the Load menu is enabled. Press Load to load the
selected file. You can also enable the touch screen to operate.
TIP
- Press > More > Import to enter the disk management interface of reference
waveform file load.
- Press
> PassFail to enable the pass/fail test function. Then press Mask > Load to
enter the disk management interface of pass/fail test mask file load.
22.5 External Storage and Load
Before external storage and load, ensure that the USB disk is properly connected. The
external memory supports image save, waveform saving, setup saving, waveform
loading, and setup loading.
1. Save the Specified Type of File in the External USB Storage Device (Take
Waveform Saving as an Example)
a. Connect a signal to the oscilloscope and obtain stable display of waveforms.
b. Press > Save Wave to enter the waveform storage interface. The disk
management interface is displayed automatically.
Store and Load
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
331
Loading ...
Loading ...
Loading ...