Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
651
71-8 show frame-tag tpid
This command is used to display the outer TPID configuration.
show frame-tag tpid [interface INTERFACE-ID [, | -]]
Parameters
71-9 show vlan mapping
This command is used to display the VLAN mapping configuration.
show vlan mapping [interface INTERFACE-ID [, | -]]
Default
None.
Command Mode
EXEC Mode.
Command Default Level
Level: 3
Usage Guideline
This command is used to display the 802.1Q tunneling configuration on interfaces.
Example
This example shows all 802.1Q tunnel port configurations.
DXS-3600-32S#show dot1q-tunnel
dot1q Tunnel Interface:TGi1/0/1
Trust inner priority :Enabled
VLAN mapping miss drop:Enabled
Insert dot1q tag :VLAN10
dot1q Tunnel Interface:TGi1/0/2
Trust inner priority :Disabled
VLAN mapping miss drop:Disabled
DXS-3600-32S#
interface INTERFACE-ID (Optional) Specifies the interfaces that will be displayed. If not specified, display the
outer TPID of all trunk ports.
Default
None.
Command Mode
EXEC Mode.
Command Default Level
Level: 3
Usage Guideline
This command is used to display the outer TPID configuration on trunk ports.
Example
This example shows the outer TPID of trunk ports.
DXS-3600-32S#show frame-tag tpid
Interface TPID
--------- -------
TGi1/0/3 0x8100
DXS-3600-32S#
Loading ...
Loading ...
Loading ...