Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
330
33-5 show lldp-dcbx remote interface
This command is used to display the physical interface’s information currently learned from the neighbor.
show lldp-dcbx remote interface INTERFACE-ID
Parameters
PFC Basic Configuration
Willing : Enabled
MBC : Enabled
PFC capability : Enabled
PFC Enable
priority0 : Disabled
priority1 : Enabled
priority2 : Disabled
priority3 : Enabled
priority4 : Disabled
priority5 : Enabled
priority6 : Disabled
priority7 : Enabled
DXS-3600-32S#
interface INTERFACE-ID Specifies the valid interfaces that are physical interfaces.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 3.
Usage Guideline
This command display the information learned from the neighbor parameters.
Example
This example shows how to display a specific physical interface’s remote
information.
DXS-3600-32S#show lldp-dcbx remote interface tenGigabitEthernet 1/0/1
Port ID : 1/0/1
Entity 1
Chassis ID Subtype : MAC Address
Chassis ID : 00-01-02-03-04-00
Port ID Subtype : Net address
Port ID : 172.18.10.11
ETS Basic Configuration
Credit Based Shaper Support : Enabled
Traffic Classes Supported : Enabled
Willing : Disabled
ETS Configuration Priority Assignment
priority0 : 0
priority1 : 4
priority2 : 0
priority3 : 0
priority4 : 5
priority5 : 0
priority6 : 2
priority7 : 0
Loading ...
Loading ...
Loading ...