Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
540
55-3 snmp-server name
This command is used to configure the system name information in global configuration mode. Use the no form of this
command to remove the configuration of system name information.
snmp-server name TEXT
no snmp-server name
Parameters
55-4 snmp-server contact
This command is used to configure the system contact information in global configuration mode. Use the no form of this
command to remove the configuration of system contact information.
snmp-server contact TEXT
no snmp-server contact
Parameters
TEXT Specifies the string that describes the system name information. The maximum
length is 255 characters (please refer to RFC1213 for the maximum length in detail).
The syntax is general string that allows space.
Default
No system name string is set.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12
Usage Guideline
Configure the system name information on the switch.
Example
This example shows how to set up the system name information with string test.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#snmp-server name test
DXS-3600-32S(config)#
Example
This example shows how to set system name information to default value.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#no snmp-server name
DXS-3600-32S(config)#
TEXT Specifies the string that describes the system contact information. The maximum
length is 255 characters (please refer to RFC1213 for the maximum length in detail).
The syntax is general string that allows space.
Default
No system contact string is set.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12
Usage Guideline
Configure the system contact information on the switch.
Example
This example shows how to set up the system contact information with string test.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#snmp-server contact test
DXS-3600-32S(config)#
Loading ...
Loading ...
Loading ...