Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
516
no router rip
52-13 show ip rip
This command is used to show the RIP information.
show ip rip [vrf vrf-name]
Parameters
Parameters
None.
Default
By default, RIP is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 8. (EI Mode Only Command)
Usage Guideline
This command is used to enable the RIP and enter the Router configuration mode of
RIP protocol. The no form of this command will disable RIP function.
You can verify your settings by entering the show ip rip command.
Example
This example shows how to enable RIP and enter the RIP router configuration
mode.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#router rip
DXS-3600-32S(config-router)#
vrf vrf-name (Optional) Specifies to display information about the RIP VRF instance.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 3. (EI Mode Only Command)
Usage Guideline
This command is used to show the settings about RIP timers, status, redistribution,
and interface RIP version, authentication, and status.
Loading ...
Loading ...
Loading ...