Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
582
59-10 service password-encryption
This command is used to encrypt the password used. The no form of this command restores to the default value.
service password-encryption
no service password-encryption
59-11 show privilege
This command is used to display the current privilege level used.
show privilege
encrypted-password Specifies the encrypted password used. This password can be up to 26 characters
long. Spaces will be ignored, however, if there is spaces before and after the
password, they will be considered part of the password.
Default
No password encryption is applied.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15
Usage Guideline
None.
Example
This example shows how to enable a password with the privilege level of 15.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#enable password level 15 12345
DXS-3600-32S(config)#
Parameters
None.
Default
By default, no encryption is applied.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15
Usage Guideline
Various passwords are displayed in the form of plain text, unless it is directly
configured in the cipher text form. After executing the service password-
encryption command, the password will transform into ciphered text.
Example
This example shows how to encrypt the password used.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#enable password level 15 12345
DXS-3600-32S(config)#service password-encryption
DXS-3600-32S(config)#
Parameters
None.
Default
None.
Command Mode
EXEC Mode.
Command Default Level
Level: 1
Usage Guideline
None.
Example
This example shows how to display the privilege level used.
DXS-3600-32S#show privilege
Current privilege level is 15
DXS-3600-32S#
Loading ...
Loading ...
Loading ...