Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
166
7-103 debug ip bgp show network
This command is used to show internal detailed information about the BGP network.
debug ip bgp show network [vrf VRF-NAME]
Parameters
Default
None.
Command Mode
Privileged Mode.
Command Default Level
Level: 15. (EI Mode Only Command)
Usage Guideline
Use this command to check internal status and detailed information of the BGP peer
group.
Example
This example shows how to display internal detail information about BGP peer
group.
DXS-3600-32S#debug ip bgp show peer-group
BGP Peer Group :local1
-----------------------------------------------------------------------
Session State : Enabled
Session Activity : Enabled
Members : 10.2.2.1, 10.2.2.2
Remote AS : 1
Holdtime Interval : 180 Seconds
Keepalive Interval : 60 Seconds
Advertisement Interval : 5 Seconds
AS Origination Interval : 0 Seconds
Connect Retry Interval : 0 Seconds
EBGP Multihop : 1
Weight : 100
Next Hop Self : Disabled
Remove Private AS : Disabled
Allowas In : Disabled
Route Reflector Client : Enabled
Soft Reconfiguration Inbound : Enabled
Community Sent to this Neighbor : Both Standard and Extended
Default Originate : Enabled
Incoming Update Prefix List : prelist1
Incoming Update Filter List : ASlist1
Route Map for Outgoing Routes : 1
Unsuppress Map : 2
Capability ORF Prefix List : None
Pass Word :
Prefix Max Count : 16000
Prefix Warning Threshold : 75
Prefix Max Warning : Disabled
DXS-3600-32S#
vrf VRF-NAME (Optional) Specifies the VRF name. The length of the VRF-NAME is 12 characters.
Default
None.
Command Mode
Privileged Mode.
Command Default Level
Level: 15. (EI Mode Only Command)
Usage Guideline
Use this command to check internal status and detailed information of the BGP
network.
Loading ...
Loading ...
Loading ...